Gorgar
Williams, 1979You're currently viewing posts by Pinsider brw84.
Click here to go back to viewing the entire thread.
Your flippers probably just need a rebuild. Here's the kit you need:
https://www.marcospecialties.com/pinball-parts/WFLKIT6979
Hard to say what's wrong with the drop targets without more info, but I bet the switch on your pop bumper needs to be adjusted. Is it activating weakly, or is it just not activating when it should? If it's the second one, you can just adjust the switch underneath the "spoon." Try to get the two contacts close to each other without touching.
Quoted from dozer1:Those look like pretty old batteries. They need changing. If you want to not change any of the settings it has now, change the batteries with the game on.
If it shows 1496 on the displays at start-up, I THINK that means the batteries are either completely dead or not making a connection. I had a similar issue with another machine that had a bad battery holder, and I seem to recall that if I turned it off and on a few times I could force it to start a game.
You're currently viewing posts by Pinsider brw84.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/gorgar-wont-start-just-bought-first-pin?tu=brw84 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Franklin, VA