Godzilla (Limited Edition)
Stern, 2021
Godzilla (Premium)
Stern, 2021
Godzilla (Pro)
Stern, 2021You're currently viewing posts by Pinsider gnassel.
Click here to go back to viewing the entire thread.
I have also joined the club a few days ago. Actually, it should be a Western title from another company, but since still no delivery date could be said, I blindly ordered a new GZ PREMIUM.
After 1 week it was delivered. Unfortunately, the box did not fit in the mailbox.
What can I say: It is the absolute WOW. Godzilla is.. was not my theme, but a great pin.
Rightly on #1 in the TOP 100
IMG_2507 (resized).JPGIMG_2524 (resized).JPGWe noticed many airballs while multiball in the lower area of the pinball fingers.
Sometimes the balls bang against the glass, sometimes they also jump over the slingshots into the outlane.
I have already reduced their strength by 10 each. 220 left and 230 right.
Is this normal or are there any tips on how to reduce the airballs?
Quoted from toro1966:Appreciate it. I still couldn't get the search bar to work, but I did end up finding it by scrolling through, lol. Appreciate your help.
Direct link to the skillshot optimizer:
http://www.shop.freddys-pinball-paradise.de/e.php?we=1&q=3475053479
Quoted from hcj13:There is a key topic post in this thread in a relative easy fix to this issue. Either a business card or some washers.
https://pinside.com/pinball/forum/topic/stern-godzilla-official-owners-club/page/316#post-7199283
Quoted from Markharris2000:The BLDG VUK mechanism seems to have a bit of a design angle issue, which can be mostly resolved by tilting the top of the mechanism back 1/16 of an inch or so. Basically you add two #6 washers to the top two attachment screws of the mechanism, and one washer to each of the middle two screws, (and also loosening the bottom screen just a hint to allow it to tilt.) Scan this thread and you'll see discussions about the washer fix, easy to do if you lift the back of the playfield out of the cabinet using playfield jacks or similiar.
Thanks a lot. Adding some washer fixed the issue.
Quoted from tscottn:sometimes my skill shot through the left upper flipper doesn't register. I noticed today that the ball can fit past the flipper without triggering the switch if it has just the right amount of power. that sucks
[quoted image]
My solution (s)
A: spring from a pen
B: created a wire gate that cover the gap.
IMG_2538 (resized).jpegIMG_2601 (resized).jpeg
You're currently viewing posts by Pinsider gnassel.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-godzilla-official-owners-club?tu=gnassel and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Schladen
Blacklick, OH