White Water
Williams, 1993I just picked up a White Water. I started working on it and noticed the Apron does not sit flat on the playfield. It’s on an angle... so I thought the playfield brackets were wrong. However according to the parts list they are correct. Can someOne verify this is normal. I’ve attached a few pictures to better depict my question.
14807F51-A9A0-4136-95B9-312BFCC8E260 (resized).jpegEE177D03-8E34-4858-A0C6-875EFEB947F8 (resized).jpegThat's all correct, it has to slope down like that to provide clearance for the loop at the of the Insanity Falls ramp.
I know I'm 3 years late, but I see that it is a thread that is highlighted in searches. Well, about 1 month ago I designed a new way to print the "White Water" aprons so that they look like they are screen printed and not having to do a "Color Match" process and it is based on the use of white ink.
I leave you the restoration process and the technical explanations here, in this or other similar decorations where this technique can be applied:
I am designing from "0" all the aprons that I had so far restored to use this in printing.
I don't know, I thought it might be interesting for people who have these or other decorations damaged.
Cheers!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/white-water-apron-question- and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Coatesville, PA
Warman, SK