The high end restoration done on my White Water was done by The Pinball Company.
I have a list below of what the Pinball Company did on it, taken from their website. They currently sell high end restoration White Water's for $19,999.00

I will have a few notes of my own at the bottom, the first notes are from the Pinball Company:

Our high end restoration games are truly a pinball collectors dream. Each machine is completely restored to better than new condition. Pristine cabinets, backglass, and playfields are the result of over 100 hours of detailed craftsmanship and new, high-quality materials. These highly collectable machines looks like a new machine coming off the assembly line. They also have clear-coated playfields that protect the playfield from wear and will make your showpiece last a lifetime. We are in an elite class of companies who can offer these completely restored machines.

High End Restoration Process:

Remove everything from Playfield and Cabinet
Tumble and polish all hardware
Sand off old cabinet artwork to bare wood
Bondo and repair cabinet (several times)
Tape off inside bottom of cabinet and paint whole cabinet
Prep cabinet surface for decals
Install decals and trim off excess
Set cabinet up on legs for reassembly
Install brand new ground braid
Disassemble power box and transformer, clean, paint and reassemble
Install new button(s), flipper button switches, new coindoor, new siderails, new lockdown bar receiver, new head head hinges, new bolts/nuts
Install head on cabinet
Disassemble backbox light board, clean harness, paint light board, and reassemble
Disassemble board panel, paint, rebuild and clean all boards, and reassemble
Disassemble speaker panel, clean/paint, install new DMD, new speaker panel plastic, reinstall in head.
Install cabinet harness (cleaned)


Playfield Work:


Install all new tnuts in new/clearcoated playfield by hand
Paint and install wooden siderails
Install all new pop bumper parts, playfield support rails, playfield hangers
Disassemble all playfield assemblies, tumble all brackets and hardware, clean all coils and install new coil wrappers, brand new plungers, coil sleeves, etc.
Install completed assemblies on playfield
Install tumbled/polished posts, rubbers
Clean and regrain all ball guides
Clean all lamp boards and install LED’s
Disassemble all playfield plastics and install new plastic set
Disassemble ramp(s), clean harnesses, polish hardware, replace switches, reassemble on brand new ramp
Clean all wiring harnesses by hand, let dry, reinstall on playfield
Reinstall playfield in cabinet and make any necessary adjustments

My own notes/Devin's notes on the Pinball being sold on top of what is listed above:
I have a ton of pictures attached of this pinball machine. Everything is in perfect condition with the exception of the left upper center inside cabinet wall, near where the glass is. It had some black paint peeled off from lifting the playfield. I've painted it black in that area. You can't tell while you're playing unless you look really close that the paint is slightly a different color for a very small area. But didn't want anyone to be surprised by that. I have a few pictures of that area in the photos. And honestly you might not even be able to tell anyways.

This pinball machine has only been owned by me since buying it from the Pinball Company. It's only been at my house and played by me, my son, and a few friends.

I have also added a these mods to it below:
- Color DMD
- White Water Pinball GRIZZLY BEAR Mod 2
- White Water Pinball RAFT SET Mod
- Williams Pinball WHITE WATER Pinball - ARTWORK MATCHING Lane Guide DECAL
- WHITE WATER SHOOTER ROD
- Pinball Flipper Rubber Rings - Competition Silicone - Blue

I just replaced the speaker panel with a brand new one since it the original one had a small bubble in the original print. This part is brand new now, the pictures represent most recent one.

If you have any other questions, or want any other pictures please reach out. It's in amazing condition and plays like new.

The White Water topper doesn't do the water sparkling effect like the original one did. I have a video of how that topper looks in motion though. From what I know the topper is original, just doesn't do the water sparkling effect.

https://www.dropbox.com/scl/fo/vk0rzyk975t0gxzpmtli6/h?rlkey=q6xs0z1dsvpl2t7z6ik6oj69y&dl=0

Besides cash, Toy Story NIB would be one I would be interested in trading for.

Pick up
Willing to ship mainland
Willing to ship overseas
Willing to deliver