Have a previously routed No Good Gofers for sale/trade.

Can ship for a delivery fee within 150 miles of Fredericksburg, VA.

Pros:
-I've put in all LEDs so it looks super nice.
-Everything mechanically works well. Gofers are solid as well as the ramp mech on the left ramp. Wheel motor does in fact work even if the report says it doesn't.
-New wheel decal.
-New coil on left ramp mech (long story, it wasn't the coil, but yay, new coil)
-New balls.
-Trough shim and new opto boards.
-New decals on targets/ramps from Flashinstinct.
-I did a shop job with Novus and wax where I removed some mechs, but didn't strip it all down to bare playfield. So, Pro/Con.


Cons:
-Currently spitting out instant multiball, I'm pretty sure it's tied to a Row 5 WHT/GRN switch matrix ground error as well as the 16 opto board in the cabinet. I've swapped out the boards, put in a trough shim, put in new non-magnetized balls. I don't have the time to figure it out.
-Cabinet wear and tear for a 1997 game (please see pictures)
-Minor cracking on ramps where they attach to pf. They don't affect gameplay, but they may cause some to say Nah.
-There are a couple of errors on startup...the infamous "Wheel Motor is broken" is one of them. The other regarding the Switch 64, which causes the wheel to not line up with the DMD. It just makes the wheel award random. Most likely tied to the 16 Opto Board under the cabinet.
-I have parts to replace the pop bumper sleeves but never got around to it.
-The slam ramp has typical wear under it.
-One of the dome spotlights is broken. I have a replacement.
-The flashers at the top do not work. I have put in the correct flashers (I installed the correct 13v #906 flashers as LEDs). I have the originals as well included, but I'm fairly certain by looking at the schematic that the wiring is simply dorked up.

I would also do trades as well: Rollergames, Demo Man, Mousin' Around, Dracula, and The Lost World: JP are just a few.

Thanks!

Pick up
Willing to ship mainland
Willing to ship overseas
Willing to deliver