Quoted from drgnlair:Here is some stuff selling off.
1 NOS sopranos plastic set. $250.00
1 NOS Spiderman plastics set.$225.00
1 original Indiana Jones German fighter plane with board wiring and bracket $100.00 was taken out of a game.
1 Elvira and the party monsters Ramps all 3 $240.00 will not split up.
1 CPR Elvira and the party monsters plastic set first run. $135.00
Eight ball apron $25.00
Fireball 2 apron $25.00
Judge dredd apron $50.00
White water apron $50.00
Black stern apron $25.00
Centaur apron $40.00
Paragon apron $40.00
Stern metal apron never used non insider connected. $55.00 to replace plastic apron on 2007-2015 sterns
Stern latch lockdown bars no button hole. $35.00 each has some surface scratches.
Williams wpc95 door bar $30.00
Early bally coin door #1 2 coin slot with wiring $45.00
Early Bally coin door #2 3 slot coin door with wiring $60.00
Early Bally coin door #3 2 coin slot door with wiring
Little Rusty in the back side $40.00
Early Bally coin door #4 just a stripped coin door $15.00
Wpc export coin door. $40.00
Bud and pizza neon sign $150.00
Lite beer neon with open that can turn off and on. 150.00
Labatt blue neon sign 150.00
CPR Mirrored Centaur backglass still in box never used $250.00
First emailed first answered. PayPal deposit cash at meeting in Allentown. I am there Thursday - Sat Morning.
Thanks Bruce[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Conspicuously absent of Classic Stern parts
Quoted from poppapin:Waaat? Are you building me a game?
Haha, had a spare shooter gauge cover for WH2O so will eventually use or sell the set after I get the apron powder coated in Illusion Blueberry
Might end up going into another build… time will tell
Friend needs the Shadow Battlefield black shroud. I’m with East Coast Vending Thursday through Saturday. Thanks.
I have a wpc95 audio visual board I can bring if presold. It was out of my Congo that I no longer have. It is tested and does work. 500 obo. Spoken for.
Also may bring a nice Stern CSI to trade if I can make a deal before the show. It was routed before I got it. No wear on the playfield and is in really nice shape.
I’ll be there Friday and Saturday for the show.
Looking for an Elvis jailhouse plastic arch if anyone has one that might be coming to Pinfest. Don’t want to have to buy an entire plastic set for a single piece. Thanks!
Looking forward to attending this year after skipping the last few years. Always fun meeting Pinsiders in person.
Are Pinside Marketplace ads required for this thread if bringing a game for sale?
Don't wanna get the quick ban hammer if they are.
I have two project pinball machines for sale. The bad, cabinets have had repainting started, no backglass. Backglass available on internet. The good, I have the top glass, had it off for photos, playfields are nice, all mechanical parts are there, playfield plastics are all good, no broken pieces. Parts alone are worth more. These will need cleaning and adjusting. Must take both, $200 or Best Offer. I can bring them Friday.
IMG_1283 (resized).jpegIMG_1284 (resized).jpegIMG_1285 (resized).jpegIMG_1286 (resized).jpegIMG_1287 (resized).jpegIMG_1289 (resized).jpegIMG_1291 (resized).jpegIMG_1294 (resized).jpegIMG_1296 (resized).jpegIMG_1293 (resized).jpegIMG_1290 (resized).jpeg
IMG_1300 (resized).jpegIMG_1301 (resized).jpegCouple more things. WPC-95 lockdown bar and receiver. Bare Stern coin door (from Godzilla) great for powder coating or plating. A coin box or two. Gun locks.
IMG_1128 (resized).jpeg Added yesterday:Bare Stern coin door is sold.
Quoted from unlockpinball:Very impressed with I-Glass. Placing another bulk order before it sells out!!
How much is the I Glass
Quoted from Phillips88:Can bring a Gottlieb Fun Land if anyone is interested. $1,000
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Fun Land is sold… still have many vintage beer neons available
Looking for Bally Party Zone left side long clear plastic ramp/slide that dumps ball behind slingshots. Please PM me if you have one that is good shape as I am looking to upgrade a repaired one.
Hey everybody I can’t wait for the show! I have this Space Mission and I just picked up a really nice Space Odyssey a month ago. I’m throwing it out there to see if anybody would be interested in my bringing this game to sell? If you do shoot me a message I could bring it Friday. Thanks!
IMG_2301 (resized).jpegIMG_2302 (resized).jpegIMG_2303 (resized).jpegIMG_2304 (resized).jpegIMG_2305 (resized).jpegIMG_2306 (resized).jpegIMG_2307 (resized).jpegI have a nice Jet Spin EM to sell or trade for another EM. It's just not my style of gameplay. I'm banned from posting photos, so cannot, just message for pics. New rubbers and LEDs.
Asking $900
I found a couple more things.
I have a transformer board from a Stern Video cabinet, I think it was Super Cobra. Never tried anything with it $25 OBO
I also have a Iron Maiden Eddie (killers) McFarlane still in box $40 OBO.
I'm still doing eproms $5 a piece, along with whets here
https://pinside.com/pinball/forum/topic/pinfest-2024-buy-sell-trade-want-no-hotel-talk/page/12#post-8091211
Quoted from Magicity:Anyone bring a set of Mr & Mrs Pacman pop bumper caps? Thanks
I think I have a new set in my stash.
I'm mulling over the thought of pulling the 2.0 kit out of my Whirlwind. Anyone have any interest? Fully complete, art blades never installed. Updated to latest code. Has been working trouble free since my initial issues on older game code/firmware.
Have had interest on the Classic Stern Iron Maiden but no takers yet! So now that we are 5 weeks out from the show, if someone wants to grab it soon, I have dropped the price on the game as I believe a deal is in place for the original backglass painting! I can bring the game to the show on Friday if I deal is in place prior.
IMG_1267 (resized).jpegIMG_1268 (resized).jpegIMG_1269 (resized).jpegIMG_1270 (resized).jpegIMG_1271 (resized).jpegIMG_1272 (resized).jpegIMG_1273 (resized).jpegIMG_1274 (resized).jpegI have up for sale a pretty good Paragon & the original sketch for the backglass! My plan on this was to totally restore it then hang the artwork by it in the room with the Iron Maiden & artwork but since I’m selling the Iron Maiden, Paragon can go. Can bring to the show on Friday if a deal is in place.
IMG_5981 (resized).jpegIMG_5986 (resized).jpegIMG_5987 (resized).jpegIMG_5988 (resized).jpegIMG_5989 (resized).jpegIMG_5990 (resized).jpegIMG_5991 (resized).jpegIMG_5992 (resized).jpegIMG_5993 (resized).jpegIMG_5994 (resized).jpeg
Finally, Miss World is still available as I just had a deal fall through due to the prospective buyers “better 1/2” objection!!
IMG_4115 (resized).jpegIMG_4117 (resized).jpegIMG_4118 (resized).jpegIMG_4119 (resized).jpegIMG_4120 (resized).jpegIMG_4121 (resized).jpegIMG_4122 (resized).jpegIMG_4123 (resized).jpegIMG_4124 (resized).jpegIMG_4125 (resized).jpegQuoted from Pbpins:I have up for sale a pretty good Paragon & the original sketch for the backglass! My plan on this was to totally restore it then hang the artwork by it in the room with the Iron Maiden & artwork but since I’m selling the Iron Maiden, Paragon can go. Can bring to the show on Friday if a deal is in place.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Just to clarify since a few have asked, the Paragon game & original backglass artwork concept sketch do not have to be sold as a package; you can buy one or the other or both & yes the backglass sketch is already framed & under glass!
Quoted from Pbpins:I just had a deal fall through due to the prospective buyers “better 1/2” objection!!
Have to respect that “better half”
Some additional stuff I can bring to the show on Friday…
- Bally transformer (all voltages tested good) with tray pulled from a MMPM…$150 OBO
- Bally main cabinet harness pulled from a MMPM…$50
- Bally power harness pulled from a MMPM…$20
- Bally lockdown bar…$30
- Williams coin box (Phoenix)…$20
- New Unused Stern Pinball Support Slide Bracket Kit for SPIKE & SPIKE 2 Machines…$50
- New Unused Stern Ball Shooter Lan Kickout Protector Set…$10
- New Unused TFTC Plastic…$15
- New Unused TFTC Cryptkeeper Shooter Cover…$100 OBO
- Bag of new standard black rubbers…almost every size…$75 OBO
- Shadow left ramp…solid but repaired via weld…$30
- Shadow right ramp…$50
- WPC Sound Boards (BSD…non-working)…one complete without ROMS…one missing all socketed chips and two large caps…both have issues but I do not remember what…I figured someone with time could turn both into a working board…$100 OBO
- Pingulp Premiums (2 new)…$15 each
- Pingulp Premiums (5 home used)…$12 each
Thanks for looking.
3D25C06F-2CB6-450B-ABBC-C9466E79C462 (resized).jpeg40044BB2-68D6-4095-8CBC-77CC9C396085 (resized).jpeg65666F8A-304C-4165-9540-DDC923F115C5 (resized).jpeg77E3ADB8-7467-4C8F-8438-85BD6D93D404 (resized).jpeg84EC0C67-4684-4305-B771-BD438C472B93 (resized).jpegC2F2144B-722E-433C-9332-F186ED833B69 (resized).jpeg75F38645-5C05-4A2D-80A2-AFAE7AB07F13 (resized).jpegB7C656A8-56B2-400F-BE59-AD6A844D0B31 (resized).jpegC692CADD-072F-46F6-9185-ADDF577CAA5C (resized).jpegDAF2D773-0674-4DF0-AFBE-B3F297097145 (resized).jpegDE442CF2-1643-4515-AC48-CB453686DB36 (resized).jpegDECB1A3F-B9B6-47BA-8233-7CBADA1A8548 (resized).jpegE53E0012-9770-4C19-898D-84B53E7E5A1D (resized).jpegECB19668-6657-4209-B62C-6F8DBB599B83 (resized).jpegEF567C3F-C285-453B-8817-F1AA815D1A79 (resized).jpegJust registered my nice Roller Games for freeplay both days. I am primarily interested in trades but of course I will sell for the right offer.
The game comes with three different rule sets (ROMs): Stock (L-2), Soeren's tournament ROM, as well as a rare Home ROM (not made by me) that includes a ball saver as well as many other fun game improvements.
Two Dot Matrix Displays. No dead spots. Full working. $200 for both. Can bring to the show on Saturday.
Quoted from GraniteStatePin:Anybody have a Gorgar drop plastic kicking around?
[quoted image]
I have your plastic, and just about a complete used set.
Also have the remains from a playfield strip (harness, metal guides, posts, drop targets, bumper caps, etc.) if you're interested.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinfest-2024-buy-sell-trade-want-no-hotel-talk/page/14 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.