I've got a friend who tore his playfield done a couple years ago to install a hardtop. That's as far as he got and of course he took no pics.
Now he has a new playfield and wants me to do a swap.
Top side is totally stripped and all mechs have been removed on the underside.
Anyone have detailed pics or can point me in the direction of some?
I just uploaded pics of my top side teardown here:
https://www.dropbox.com/scl/fo/yt1kxljls0fz8us4im1a6/h?rlkey=f3283p9wezobdily3jc64otqs&dl=0
Hope that link works for you.
I suggest downloading them as I am running out of room on dropbox and they won't be up there forever.
Bryan_Kelly
I would go over the photo morgue at the High Speed club.
raw playfield notes:
1) first clean Rollover Buttons
2) test fit & cap drill reset any bad post alignment.
2a) test fit plastic set over holes drilled, etc.
3) Six [high-low hex head screws] are used to mount all four wire form ramps.
4) beef-up the plastic post fastener to the left of the black ramp entrance.
5) One can counter sink the kickout side plates, and the long ball entrance side rail
5a) option kick-back side rail.
6) make sure to add anti-sort sleeves for the GI circuitry.
7) Brights Flashers can be rewired to #89 style.
Quoted from jeffc:I just uploaded pics of my top side teardown here:
https://www.dropbox.com/scl/fo/yt1kxljls0fz8us4im1a6/h?rlkey=f3283p9wezobdily3jc64otqs&dl=0
Hope that link works for you.
I suggest downloading them as I am running out of room on dropbox and they won't be up there forever.
Bryan_Kelly
Link doesn’t work.
Quoted from meSz:To confirm, this is High Speed and not HSII The Getaway?
This is High Speed.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/need-high-speed-tear-down-pics and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Lakeville, MN