They there !..So Im working on a Centaur 2. Has 4 balls in trough, 1 for drain switch area. When powered on, mpu boots , then I get all zeros on displays. If I activate trough switch 1, the game lights up and flashes etc, but won't start, if I activate switch 1 again..the game starts. The ball is shot from drain area to shooter lane as soon as game boots...when game is on, if the ball drains it just gets shot right back out, no bonus , no recognition that it even drained. I have included some pics..I tested all 3 trough switches, all good. Ball drain switch is working as well..any ideas... pretty bizarre behavior... solenoid driver is fresh re built , works fine in other games...

IMG_20230228_181749378 (resized).jpg

IMG_20230228_181839365 (resized).jpg

IMG_20230228_181850392 (resized).jpg

IMG_20230228_181905232 (resized).jpg

Bump.....

Yes I have reseated...and repinned some of the connectors..no change... pretty sure its switch related, the wiring was hacked. I havent been able to get a clear picture of the switches from anyone. I have the manual, but dont see any diagrams that show the switches and wiring. The switches all seem to be ok in switch test... except a few broken targets ....the ball is constantly kicked out after draining...no bonus points or ball advance to #2 ...