Avengers: Infinity Quest (pro)
Stern, 2020Anyone else have an issue with their ball slipping past the post? Ours inconsistently slips around the post but often enough that it disrupts play. Included is a picture showing what is going on. We can't seem to figure out what adjustment is needed to make it stay where it is supposed to. Appreciate any feedback!
AIQ (resized).jpgThe wireform where it drops from is usually the cause of this. Make sure the ball is coming out of it to the left. It looks like the hole is leaning slightly to the right in this picture. Often what you have to do is *twist* the wireform slightly (counterclockwise from the player's point of view) so that the ball will come out of the left side of the hole. Also, a slight right-to-left lean of the back legs can help too.
Quoted from vikingerik:The wireform where it drops from is usually the cause of this. Make sure the ball is coming out of it to the left. It looks like the hole is leaning slightly to the right in this picture. Often what you have to do is *twist* the wireform slightly (counterclockwise from the player's point of view) so that the ball will come out of the left side of the hole. Also, a slight right-to-left lean of the back legs can help too.
And just loosening the screws and moving the ramp a little to the left
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/aiq-pro-ball-slips-around-post and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Appleton, WI